Tecnova – IMS Tri Mechanical

Tecnova Pelletizers

admin — Sat, 29 Aug 2020 11:29:13 +0000

Water ring pelletizers for a high quality pellet production.
Suitable for most thermoplastic materials (PE, PP, PS, ABS, etc.).
Available in different sizes and configurations, completely in stainless steel, characterized by extreme ease of use and maintenance.

Tecnova Screenchangers

admin — Sat, 29 Aug 2020 11:28:22 +0000

Different filtration systems are available depending on the application and level of contamination of the material.
From the most traditional lever changing machine to the hydraulic one, with two cavities or with four cavities “continuous flow”.
Possibility of fully automatic screenchangers on request.

Tecnova Extruders

admin — Sat, 29 Aug 2020 11:27:21 +0000

Plasticizing groups widely customizable according to customer’s requirements.
Diameter, length, screw profile, steel type are just a few of the many parameters configurable directly by the customer for a truly “tailor-made” supply. Upgrades or modifications of existing equipment are also available.

Tecnova Feeding Systems

admin — Sat, 29 Aug 2020 11:26:29 +0000

Dosing and forced feeding systems suitable to properly and continuously feed the extruder. Different solutions developed according to the type and appearance of the material (foam, film, ground, etc.). Closed loop feedback control system to ensure steady and high productivity of the extruder.

Tecnova Silos

admin — Sat, 29 Aug 2020 11:25:23 +0000

Storage systems for flakes and regrind materials in various sizes and configurations, ideal as buffer to ensure constant dosage and productivity of the extruder.
Completed of depulators and feeding screws with adjustable speed.

Tecnova Nello 3M7 Automatic Screenchanger

admin — Sat, 29 Aug 2020 11:24:06 +0000

The automatic screenchanger model “3M7” can be used for several applications: compounding, pellets, post-industrial and post-consumer recycling and agricultural film. The filtering element is a mesh belt available in different sizes and different filtration ranges, up to 80 micron. It guarantees high regranulate quality at low operating costs and a fully-automatic process. The system principle lies in its continuity. The new TECNOVA 3M7 guarantees uninterrupted melt flow without any significant pressure peak during screen changings. The material normally flows through a melt channel which has a screen belt filtering impurities. Anytime the pressure value reaches the set threshold, the screen change process starts, the dirty section is replaced by a clean and fresh one. The whole cycle lasts about 20 seconds.

Some major benefits:

High filter fineness possible, up to 80 micron;
Extruder operation during filter band feed;
Fully automated filtration;
Very low operating costs;
reduction of energy consumption;
almost zero polymer loss during cleaning cycle;
minimize material waste;
reduction of personnel involved;
recycle highly-contaminated plastics;
reduce extrusion system downtimes;
reduction of maintenance interventions;
increase extrusion system throughput and production rates;
24/7 production, with no interruptions or downtimes.

Tecnova 54D-TTC Recycling Extrusion Line

admin — Sat, 29 Aug 2020 11:22:35 +0000

The ideal solution for recycling of regrind material, highly printed and highly moist. The extruder is equipped with two venting zones and can be equipped with optionals like dosing systems for additives or masterbatches. The innovative VTS (Vacuum Twin Stuffer) system is available for materials with high humidity. The screw profile optimized for high performance and high degassing does not require agglomeration and ensures excellent energy efficiency as well as cost saving and greater simplicity of use and maintenance. Equipped with an hydraulic screenchanger with two breakers-plate. Depending on the application, four breakers-plate or fully automatic screenchangers are also available for highly contaminated materials. A water ring pelletizer guarantees high quality pellets.

Tecnova 33D Spaghetti Recycling Extrusion Line

admin — Sat, 29 Aug 2020 11:21:21 +0000

Specific lines for hydrophobic or special materials such as PET / PA.
The extruder is equipped with one venting zone and can be equipped with optionals like dosing systems for additives or masterbatches.
Provided with a continuous flow hydraulic screenchanger.
Strand pelletizer with cooling tank.
Possibility of patented “blower” drying system for optimum drying of spaghetti before cutting.

Tecnova 17D Rubber Recycling Extrusion Line

admin — Sat, 29 Aug 2020 11:20:24 +0000

Specific extruders for the processing of natural and thermoplastic rubbers. (SBS, SEBS, EPDM, etc.)
Working temperature controlled by individual thermoregulation units for each zone ensure optimum process temperature control.
Inner of the screw thermoregulated.
These lines are the optimum base for coupling to extrusion heads for pipes and profiles.

Tecnova 37D-TTC Recycling Extrusion Line

admin — Sat, 29 Aug 2020 11:19:25 +0000

The right choice for recycling regrind material, lightly printed and slightly moist.
The extruder is equipped with a venting system and can be equipped with optionals like dosing systems for additives or masterbatches.
The screw profile optimized for high performance and high degassing does not require agglomeration and ensures excellent energy efficiency as well as cost saving and greater simplicity of use and maintenance.
Equipped with an hydraulic screenchanger with two breakers-plate.
Depending on the application, four breakers-plate or fully automatic screenchangers are also available for highly contaminated materials. A water ring pelletizer guarantees high quality pellets.