Hopper and Framework: The body is constructed of 14ga steel and uses a 7ga formed stacking pad on each leg. The frame base includes two-way 12 gauge fork pockets.

Welding Specification: All product contact welds are continuous and ground to remove irregularities. All non-product contact welds are stitch type, but continuous where required for strength, and ground to remove irregularities.

Surface Treatment: All non-product contact surfaces are sandblasted or solvent cleaned and painted with IMS Tri Mechanical metallic blue enamel paint.

• Capacity and Dimensions: IMS’ pneumatic tilt table is designed to support the full weight of the container up to a maximum of 2,500 pounds. The system has a maximum lifting capacity of 1,500 lbs., which is factory preset at approx. 900 pounds to avoid material spillage, with a total rotation of 45°. The footprint of the system is approx. 71″ wide x 52″ deep in the load position and 72” wide x 80” deep when in the maximum tilt position.
• Framework: The system is constructed of formed 7ga steel. The main framework includes all necessary mounting brackets for the standard and optional devices. The pivot carriage includes an adjustable vacuum pick-up wand holder.       The holder is designed with a 3-1/2” id and features 12” of adjustment to accommodate various container heights.
• Load Design: The container is loaded, at floor level, using a pallet jack or fork lift truck into the 44” w x 44” d bucket of the tilt table. The standard pivot carriage is designed to accommodate containers up to 48” square x approx. 60” tall.
• Welding and Finish Specifications: The equipment is constructed of carbon steel stitch welded (continuous where required for strength) and ground to remove irregularities.       The equipment will be sandblasted (or solvent cleaned), primed and painted with IMS Metallic Blue Industrial Enamel.
• Pneumatic Control System: The system will include a complete pneumatic control system for all devices. The system will be provided with a manual 3-position air valve. The hand valve is mounted to the pivot carriage of the system and includes all necessary filter regulators, and a single supply connection.

Any molding operation that is feeding its molding machines, mixers or blenders from gaylords with pneumatic pick-up tubes needs to have this floor level tilter. It will allow each gaylord to be completely drained without risk of running dry, causing bad mixes or empty hoppers. Power system: Air Base footprint: 71″ x 52″ Space required: 71″ x 80″ Capacity: 2500 lbs Model: 29-950

1 Part in. 10,000 Graduations
Load Cell Mount Minimizes the Chance of Damage
Auto Zero Tracking
Load Cell Linearization
Data Output, RS232C, 20MA Current Loop
Auto Accumulation
Remote Mounted Panel

• Rugged Aluminum Tube Construction
• Standard Size Chambers, 0.2 cu. ft., 0.6 cu. ft., 2 cu. ft., 4 cu. ft., 6 cu. ft.
• Designed for Years of Trouble Free Service

Gas Exhaust Filtration

Dust particles can be carried over with air at the gas exhaust outlet on the cyclone. Three levels of filtration are available as standard options with Foremost Cyclones.

The first is a simple cotton Type “E” draw string filter bag which mounts directly to the gas exhaust outlet. The second is a single bag hanging filter bag. A 35 to 40 micron 7 oz Enamelion duck filter bag is hung off a horizontal scroll with a 90 degree elbow.

Safety Dump Valves

If these bags are not regularly emptied the material accumulated in these bags can weigh several hundred pounds. This weight, and the elevated location of some bags, can sometime make it difficult to reach and handle the bags while cleaning them out.

To help overcome this problem, Foremost has developed a valve for installation on the bottom of the filter bags. This valve will automatically dump material out of the bag when the weight of accumulated material inside exceeds a pre-set value. A drum or gaylord positioned under the valve is used to collect the dumped material.

• Aluminum filter housing and cyclone
• Optional: Stainless Steel and Carbon Steel
• 15.5 Square Feet of 100 Micron Filtration Media
• Optional: Filtration Media Grades
• Available with multiple inlet diameters
• 6″ Diameter Discharge
• Flange mounted for mounting to bins, drum stands, and gaylord stands
• 99.9% Dust Free on particles at 100 Microns or more
• Automatic Pulse Jet Filter Cleaning with a Pulse Timer Panel

The model DI-2 can be supplied with material pick-up “suction lances”. They are ideal for emptying bulk cartons and drums, feeding storage bins, loading machine hoppers, and other in-plant conveying applications. They are easily portable and are designed for continuous operation.

In other applications, and with all other units, a chute or similar device is required to direct material into the inlet of the blower or impeller. They can be supplied on a separate base, or in some cases, integrally mounted on a grinder or blender.

Under normal circumstances, a cyclonic air separator is required at the material receiving location.

They are ideal for emptying bulk cartons and drums, feeding storage bins, loading machine hoppers, and other in-plant conveying applications. They are easily portable and are designed for continuous operation.

In other applications, and with all other units, a chute or similar device is required to direct material into the inlet of the blower or impeller. They can be supplied on a separate base, or in some cases, integrally mounted on a grinder or blender.

Under normal circumstances, a cyclonic air separator is required at the material receiving location.

Foremost has been building blowers for the plastics industry since the 1960’s. We offer three different types of direct drive blowers.

These units can be supplied with material pick-up “suction lances”. They are ideal for emptying bulk cartons and drums, feeding storage bins, loading machine hoppers, and other in-plant conveying applications. They are easily portable and are designed for continuous operation.

In other applications, and with all other units, a chute or similar device is required to direct material into the inlet of the blower or impeller. They are commonly used to unload grinders, granulators, blenders, and material storage tanks.
Under normal circumstances, a cyclonic air separator is required at the material receiving location.

• Direct drive.
• 3,450 RPM motor.
• Cast aluminum impeller.
• Cast aluminum housing.
• Cast aluminum inlet plate.
• Safety Switch protected.
• Combination motor starter with through the door disconnect.
• All mounted on a rigid base.