Hopper and Framework: The body is constructed of 14ga steel and uses a 7ga formed stacking pad on each leg. The frame base includes two-way 12 gauge fork pockets.

Welding Specification: All product contact welds are continuous and ground to remove irregularities. All non-product contact welds are stitch type, but continuous where required for strength, and ground to remove irregularities.

Surface Treatment: All non-product contact surfaces are sandblasted or solvent cleaned and painted with IMS Tri Mechanical metallic blue enamel paint.

• Capacity and Dimensions: IMS’ pneumatic tilt table is designed to support the full weight of the container up to a maximum of 2,500 pounds. The system has a maximum lifting capacity of 1,500 lbs., which is factory preset at approx. 900 pounds to avoid material spillage, with a total rotation of 45°. The footprint of the system is approx. 71″ wide x 52″ deep in the load position and 72” wide x 80” deep when in the maximum tilt position.
• Framework: The system is constructed of formed 7ga steel. The main framework includes all necessary mounting brackets for the standard and optional devices. The pivot carriage includes an adjustable vacuum pick-up wand holder.       The holder is designed with a 3-1/2” id and features 12” of adjustment to accommodate various container heights.
• Load Design: The container is loaded, at floor level, using a pallet jack or fork lift truck into the 44” w x 44” d bucket of the tilt table. The standard pivot carriage is designed to accommodate containers up to 48” square x approx. 60” tall.
• Welding and Finish Specifications: The equipment is constructed of carbon steel stitch welded (continuous where required for strength) and ground to remove irregularities.       The equipment will be sandblasted (or solvent cleaned), primed and painted with IMS Metallic Blue Industrial Enamel.
• Pneumatic Control System: The system will include a complete pneumatic control system for all devices. The system will be provided with a manual 3-position air valve. The hand valve is mounted to the pivot carriage of the system and includes all necessary filter regulators, and a single supply connection.

Any molding operation that is feeding its molding machines, mixers or blenders from gaylords with pneumatic pick-up tubes needs to have this floor level tilter. It will allow each gaylord to be completely drained without risk of running dry, causing bad mixes or empty hoppers. Power system: Air Base footprint: 71″ x 52″ Space required: 71″ x 80″ Capacity: 2500 lbs Model: 29-950