Extruders and extrusion equipment
Extruders and extrusion equipment from Bausano, Tecnova, Kolcor and Santa Fe Machine Works (SFM) offered by IMS Tri Mechanical
| Diameters | from 45 to 75 mm (profiles) |
|---|---|
| L/D Ratio | 25-30 (profiles) |
| Cooling areas | 4 (profiles) |
| Heating areas | 4 (profiles) |
| Rotation speed (rpm) | 75 (profiles) |
| Diameter | 118 mm |
|---|---|
| Direction of rotation | Counter-rotating |
| Rotation speed (rpm) | 8÷45 |
| Thrust system dynamic load | 2250 kN |
| Torque per screw | 18190 Nm |
| Thermostating | Fluid-type |
| L/D Ratio | 20-26-30 |
| Degassing | with vacuum pump |
| Cooling areas | Air |
| Diameter | 130 mm |
|---|---|
| Direction of rotation | Counter-rotating |
| Rotation speed (rpm) | 8÷45 |
| Thrust system dynamic load | 2830 kN |
| Torque per screw | 24700 Nm |
| Thermostating | Fluid-type |
| L/D Ratio | 25-30-36 |
| Degassing | with vacuum pump |
| Cooling areas | Air |
| Diameter | 158 mm |
|---|---|
| Direction of rotation | Counter-rotating |
| Rotation speed (rpm) | 8÷38 |
| Thrust system dynamic load | 5085 kN |
| Torque per screw | 36600 Nm |
| Thermostating | Fluid-type |
| L/D Ratio | 21-26-30 |
| Degassing | with vacuum pump |
| Cooling areas | Air |
| Diameter | 170 mm |
|---|---|
| Direction of rotation | Counter-rotating |
| Rotation speed (rpm) | 8÷45 |
| Thrust system dynamic load | 5900 kN |
| Torque per screw | 46960 Nm |
| Thermostating | Fluid-type |
| L/D Ratio | 24-28 |
| Degassing | with vacuum pump |
| Cooling areas | Air |
| Diameter | 30 mm |
|---|---|
| Motors | 2 x 1.5 kW (MD30/19 & MD30/30) |
| Total installed power | 10.5 kW (MD 30/19) |
| Diameter | 52 mm |
|---|---|
| Direction of rotation | Counter-rotating |
| Rotation speed (rpm) | 14÷79 |
| Thrust system dynamic load | 410 kN |
| Torque per screw | 1780 Nm |
| Thermostating | Fluid-type |
| L/D Ratio | 23 |
| Degassing | with vacuum pump |
| Cooling areas | Air |