Designed to reach high extruded material linear speeds and ensure dimensional stability, with a reduction in water and electricity consumption up to 50%.

The E-Go is available for pipe and profile extrusion.

Characteristics

• panel on board the machine;
• management with microprocessor;
• grooved feeding zone;
• direct coupling;
• motor-reducer;
• gear unit oil cooling assembly;
• screw designed for every type of material;
• melt temperature and pressure sensor;
• synchronisation with the rest of the end-of-line and with any co-extruders.

Benefits

Thanks to the special design of screw and cylinder, we can boast an energy saving on the installed power, while guaranteeing the best production performance.

• high level of specialisation for each application;
• high performance for each production;
• low maintenance costs;
• long lifetime;
• mobile and fixed positions with modifiable height and angle for a quick connection to other extrusion equipment;
• excellent melt homogeneity.

Applications

Single-screw extruders are suitable for manufacturing products where only the polymer is melted. Pipes and small pipes in polyolefins and in general from already granulated raw materials for the transport of gas, water and industrial fluids. Medical small pipes and pockets in PVC, EVA and TPE where the dimensional stability achieved with MD Plus series extruders is not required. Rigid and flexible technical profiles of different shapes and types in PE, PVC, PC, ABS, PMMA, TPE, TPR. For particular processing it is also possible to combine a single-screw extruder with a twin-screw, as in the case of co-extrusion.

Characteristics

1. Pressure transducer
2. Multistage and thermocontrolled screws with speed variation
3. Degassing
4. Stainless steel double jacket barrel protection
5. Electronic level for hopper stop
6. Revolving stainless steel hopper for easy cleaning
7. Screw conveyor dispenser
8. Exclusive and patented MultiDrive transmission system
9. Thrust bearing loading cell with two alarm thresholds
10. Asynchronous motors connected to an inverter
11. Screw thermostat control unit
12. Thrust bearing with high load capacity
13. Oil circulation pump with filter and heat exchanger
14. Touch-screen plc control panel

Equipment

Bausano twin-screw extruders are equipped with the innovative and patented MULTIDRIVE 4×2 transmission system. Motion distribution on four different points increases the duration of shafts and gear box, and thus the general reliability of the extruder. This results in an increase in power available on screws and a reduction of energy consumption at the same performance.

Motorisation

Single static frequency converter. Both mechanical and electronic synchronism makes motor rotation more constant and increases the machine efficiency.

Frequency converter

Chosen for the motorisation of the MD Plus twin-screw extruders, it guarantees the same speed of the four motors, greater energy savings, lower installation and maintenance costs, more solidity and durability over time and perfect power distribution across all motors.

Thrust system

The multi-stage thrust bearings used on these machines make it possible to triple the dynamic load and make the extruders ideal for managing high production levels.

Supply

Possibility of customising the machines with different supply systems: gravimetric, volumetric and multicomponent.

PLC touch screen

Each extruder mounts a PLC control panel with touch-screen, with the possibility of controlling each phase remotely.

Characteristics

1. Pressure transducer
2. Multistage and thermocontrolled screws with speed variation
3. Degassing
4. Stainless steel double jacket barrel protection
5. Electronic level for hopper stop
6. Revolving stainless steel hopper for easy cleaning
7. Screw conveyor dispenser
8. Exclusive and patented MultiDrive transmission system
9. Thrust bearing loading cell with two alarm thresholds
10. Asynchronous motors connected to an inverter
11. Screw thermostat control unit
12. Thrust bearing with high load capacity
13. Oil circulation pump with filter and heat exchanger
14. Touch-screen plc control panel

Equipment

Bausano twin-screw extruders are equipped with the innovative and patented MULTIDRIVE 4×2 transmission system. Motion distribution on four different points increases the duration of shafts and gear box, and thus the general reliability of the extruder. This results in an increase in power available on screws and a reduction of energy consumption at the same performance.

Motorisation

Single static frequency converter. Both mechanical and electronic synchronism makes motor rotation more constant and increases the machine efficiency.

Frequency converter

Chosen for the motorisation of the MD Plus twin-screw extruders, it guarantees the same speed of the four motors, greater energy savings, lower installation and maintenance costs, more solidity and durability over time and perfect power distribution across all motors.

Thrust system

The multi-stage thrust bearings used on these machines make it possible to triple the dynamic load and make the extruders ideal for managing high production levels.

Supply

Possibility of customising the machines with different supply systems: gravimetric, volumetric and multicomponent.

PLC touch screen

Each extruder mounts a PLC control panel with touch-screen, with the possibility of controlling each phase remotely.

Consisting of one or two inlets on a single barrel with side pressure probes, MD 30 allows you to process multiple materials with a single doser. Equipped with wheels, the extruder can be easily moved and any inspection and cleaning operation is simple and fast, thanks to the wider degassing.

Based on Bausano experience and on-going research of technologies and solutions with constantly increasing levels of performance, the new MD Plus extruders for plastic materials improve line productivity and reduce costs and energy consumption.

Characteristics

1. Pressure transducer
2. Multistage and thermocontrolled screws with speed variation
3. Degassing
4. Stainless steel double jacket barrel protection
5. Electronic level for hopper stop
6. Revolving stainless steel hopper for easy cleaning
7. Screw conveyor dispenser
8. Exclusive and patented MultiDrive transmission system
9. Thrust bearing loading cell with two alarm thresholds
10. Asynchronous motors connected to an inverter
11. Screw thermostat control unit
12. Thrust bearing with high load capacity
13. Oil circulation pump with filter and heat exchanger
14. Touch-screen plc control panel

Equipment

Bausano twin-screw extruders are equipped with the innovative and patented MULTIDRIVE 4×2 transmission system. Motion distribution on four different points increases the duration of shafts and gear box, and thus the general reliability of the extruder. This results in an increase in power available on screws and a reduction of energy consumption at the same performance.

Motorisation

Single static frequency converter. Both mechanical and electronic synchronism makes motor rotation more constant and increases the machine efficiency.

Frequency converter

Chosen for the motorisation of the MD Plus twin-screw extruders, it guarantees the same speed of the four motors, greater energy savings, lower installation and maintenance costs, more solidity and durability over time and perfect power distribution across all motors.

Thrust system

The multi-stage thrust bearings used on these machines make it possible to triple the dynamic load and make the extruders ideal for managing high production levels.

Supply

Possibility of customising the machines with different supply systems: gravimetric, volumetric and multicomponent.

PLC touch screen

Each extruder mounts a PLC control panel with touch-screen, with the possibility of controlling each phase remotely.

Characteristics

1. Pressure transducer
2. Multistage and thermocontrolled screws with speed variation
3. Degassing
4. Stainless steel double jacket barrel protection
5. Electronic level for hopper stop
6. Revolving stainless steel hopper for easy cleaning
7. Screw conveyor dispenser
8. Exclusive and patented MultiDrive transmission system
9. Thrust bearing loading cell with two alarm thresholds
10. Asynchronous motors connected to an inverter
11. Screw thermostat control unit
12. Thrust bearing with high load capacity
13. Oil circulation pump with filter and heat exchanger
14. Touch-screen plc control panel

Equipment

Bausano twin-screw extruders are equipped with the innovative and patented MULTIDRIVE 4×2 transmission system. Motion distribution on four different points increases the duration of shafts and gear box, and thus the general reliability of the extruder. This results in an increase in power available on screws and a reduction of energy consumption at the same performance.

Motorisation

Single static frequency converter. Both mechanical and electronic synchronism makes motor rotation more constant and increases the machine efficiency.

Frequency converter

Chosen for the motorisation of the MD Plus twin-screw extruders, it guarantees the same speed of the four motors, greater energy savings, lower installation and maintenance costs, more solidity and durability over time and perfect power distribution across all motors.

Thrust system

The multi-stage thrust bearings used on these machines make it possible to triple the dynamic load and make the extruders ideal for managing high production levels.

Supply

Possibility of customising the machines with different supply systems: gravimetric, volumetric and multicomponent.

PLC touch screen

Each extruder mounts a PLC control panel with touch-screen, with the possibility of controlling each phase remotely.

Characteristics

1. Pressure transducer
2. Multistage and thermocontrolled screws with speed variation
3. Degassing
4. Stainless steel double jacket barrel protection
5. Electronic level for hopper stop
6. Revolving stainless steel hopper for easy cleaning
7. Screw conveyor dispenser
8. Exclusive and patented MultiDrive transmission system
9. Thrust bearing loading cell with two alarm thresholds
10. Asynchronous motors connected to an inverter
11. Screw thermostat control unit
12. Thrust bearing with high load capacity
13. Oil circulation pump with filter and heat exchanger
14. Touch-screen plc control panel

Equipment

Bausano twin-screw extruders are equipped with the innovative and patented MULTIDRIVE 4×2 transmission system. Motion distribution on four different points increases the duration of shafts and gear box, and thus the general reliability of the extruder. This results in an increase in power available on screws and a reduction of energy consumption at the same performance.

Motorisation

Single static frequency converter. Both mechanical and electronic synchronism makes motor rotation more constant and increases the machine efficiency.

Frequency converter

Chosen for the motorisation of the MD Plus twin-screw extruders, it guarantees the same speed of the four motors, greater energy savings, lower installation and maintenance costs, more solidity and durability over time and perfect power distribution across all motors.

Thrust system

The multi-stage thrust bearings used on these machines make it possible to triple the dynamic load and make the extruders ideal for managing high production levels.

Supply

Possibility of customising the machines with different supply systems: gravimetric, volumetric and multicomponent.

PLC touch screen

Each extruder mounts a PLC control panel with touch-screen, with the possibility of controlling each phase remotely.

Characteristics

1. Pressure transducer
2. Multistage and thermocontrolled screws with speed variation
3. Degassing
4. Stainless steel double jacket barrel protection
5. Electronic level for hopper stop
6. Revolving stainless steel hopper for easy cleaning
7. Screw conveyor dispenser
8. Exclusive and patented MultiDrive transmission system
9. Thrust bearing loading cell with two alarm thresholds
10. Asynchronous motors connected to an inverter
11. Screw thermostat control unit
12. Thrust bearing with high load capacity
13. Oil circulation pump with filter and heat exchanger
14. Touch-screen plc control panel

Equipment

Bausano twin-screw extruders are equipped with the innovative and patented MULTIDRIVE 4×2 transmission system. Motion distribution on four different points increases the duration of shafts and gear box, and thus the general reliability of the extruder. This results in an increase in power available on screws and a reduction of energy consumption at the same performance.

Motorisation

Single static frequency converter. Both mechanical and electronic synchronism makes motor rotation more constant and increases the machine efficiency.

Frequency converter

Chosen for the motorisation of the MD Plus twin-screw extruders, it guarantees the same speed of the four motors, greater energy savings, lower installation and maintenance costs, more solidity and durability over time and perfect power distribution across all motors.

Thrust system

The multi-stage thrust bearings used on these machines make it possible to triple the dynamic load and make the extruders ideal for managing high production levels.

Supply

Possibility of customising the machines with different supply systems: gravimetric, volumetric and multicomponent.

PLC touch screen

Each extruder mounts a PLC control panel with touch-screen, with the possibility of controlling each phase remotely.

Characteristics

1. Pressure transducer
2. Multistage and thermocontrolled screws with speed variation
3. Degassing
4. Stainless steel double jacket barrel protection
5. Electronic level for hopper stop
6. Revolving stainless steel hopper for easy cleaning
7. Screw conveyor dispenser
8. Exclusive and patented MultiDrive transmission system
9. Thrust bearing loading cell with two alarm thresholds
10. Asynchronous motors connected to an inverter
11. Screw thermostat control unit
12. Thrust bearing with high load capacity
13. Oil circulation pump with filter and heat exchanger
14. Touch-screen plc control panel

Equipment

Bausano twin-screw extruders are equipped with the innovative and patented MULTIDRIVE 4×2 transmission system. Motion distribution on four different points increases the duration of shafts and gear box, and thus the general reliability of the extruder. This results in an increase in power available on screws and a reduction of energy consumption at the same performance.

Motorisation

Single static frequency converter. Both mechanical and electronic synchronism makes motor rotation more constant and increases the machine efficiency.

Frequency converter

Chosen for the motorisation of the MD Plus twin-screw extruders, it guarantees the same speed of the four motors, greater energy savings, lower installation and maintenance costs, more solidity and durability over time and perfect power distribution across all motors.

Thrust system

The multi-stage thrust bearings used on these machines make it possible to triple the dynamic load and make the extruders ideal for managing high production levels.

Supply

Possibility of customising the machines with different supply systems: gravimetric, volumetric and multicomponent.

PLC touch screen

Each extruder mounts a PLC control panel with touch-screen, with the possibility of controlling each phase remotely.